Guitar Amp Cable Not Working
If this produces a crackling noise then you may have a short in the input jack of the guitar itself. Tap the tip of the real tone cable with your finger to see if there is any response on the screen.
If not, try gently moving the end of the cable that is plugged into the guitar back and forth.
Guitar amp cable not working. Lightsnake i had recently purchased the lightsnake from guitar center, and was sure it would work with the game. With the cable plugged, play on your guitar and note which channels are active. If so, that would mean that the cable might not be the issue.
If the amp begins to operate, then the problem could be dirty contacts in one of the jacks. Howeve, initially it did not. Now, with a wire, touch the sleeve with one end of the wire and the tip of the jack cable with the other end of the wire (see pictures).
If the fault is not with the cable or amp it must be with the wires in the jack socket of the guitar. Wanted to connect it to my pc and use with guitar rig 4, since i can't get the amp i need in my city!! I got the game working with an alternate (1/4) to usb cable.
Didn't come with any cd or such stuff and so i haven't got any sort of drivers for it!! Plug your guitar in your amp and plug the right type of 1/4 jack cable (mono or stereo) in the footswitch input(s). Always make sure your amp is working and the cables are in good working condition.
If possible, plug in another guitar to the same line to see if it works. If it’s not working right away. Choosing the right guitar cable
The game inherently looks specifically for the real tone cable. The speaker mute switch is not engaged. There is a very simple (.exe fix) / (mod) that can be used in place of the game's original.exe i cannot go into deatil.
It's like it's only working at half power or there is some signal crossing or. Plug a different guitar cable into the amp and guitar. If you don't have another guitar, plug a cable into the amp and turn the volume up slightly.
This is the cheapest way to connect your electric guitar to a pc or laptop. The amp is properly connected to the speakers/enclosure. Touching the end of the cable with your finger should make a loud hum noise.
It is not uncommon for a knob to be turned all the way off by accident. The instrument is properly plugged in at both ends. Take any guitar cable (short effects jumpers work best) and “jump” the loop—plug one end into the send jack and one into the return jack.
I figured i could use my real tone cable with them, but i don't get any sound from any of them. If no sound comes from either, then it is probably a faulty cable. The ¼ inches jack connections.
A bad cable can produce scratchy, crackling sounds, intermittent sound or no so sound at all. If that does not work then prepare to unscrew and take a look at your jack socket wiring. Anyways, i’ve recently had a shocking experience with this amp.
I've been wanting to mess with amp modeling software on my laptop, so i downloaded some free versions; If you’re using cables from a pedalboard kit, the best thing you can do is measure twice and cut once. The amp is completely dead if the amp is completely silent (no speaker hum or hiss at all) then the problem can be just about anywhere in the amp but you should suspect a bad tube, blown fuse or the power supply in that order.
The guitar and strings are connected through the cable to the amp chassis ground. Spray a bit of electronic contact cleaner into each jack (i prefer with lubricant, if possible). The amp does go silent when i plug the big cable from guitar to the amp headphones plug, but it still doesn't play the sound when i plug the headset to the aux plug.
You can also use a dedicated ⅛ inch male to ¼ inch male cable.but this has a drawback, this cable can’t be used to connect to an amp. There's no great way to get at the ¼ inches jack; To make sure the problem is with the cable, play the guitar through one amp with two different cables.
Your body is actually an antenna for noise and a source of noise and when you touch something on the guitar that's grounded you ground your body and channel that noise to ground. What i mean is the plugin is not fully coming through; I have a rather old guitar tube amp, circa ’63ish, not sure exactly.
Buying the best guitar cables may not seem that big of a deal but surely have a great impact on making or breaking the tune of the guitar, therefore selecting the one that is one of the best available in the market is of great importance. The volume knobs and tone knobs usually have to be turned to at least one or higher for the bass amp to produce sound. Try to play the guitar in each amp using the same cable.
Methods for using a guitar amp with headphones, both tube and solid state variations. 1970 standel custom guitar amp. The instrument volume is sufficiently up.
I'm running into a sudden problem using 3rd party amp plugins. Since guitar rig and amplitube only give free trials, i was going to spend most of my time in amplion. If the amplifier and the cable work with another guitar, there is really only one other possible source for your problem:
The amp volume is sufficiently up. Cutting guitar pedal custom cables. Plug it in to a tuner if you have one.
Try a new rectifier tube. I was holding my guitar while the amp was on, and reached up to mess with something else that was electric, and i felt a moderate shock on my hand and arm. You have to either remove the tailpiece somehow or drill into the cavity for the jack from the back of the guitar.
Try plugging in a guitar cable, turn up all the amp's volume, gain and master volume controls up a little and touch the tip of the guitar. Tried a different headset, same results, not working. Guitar rig, amplitube, and amplion.
If your guitar and amp sound normal, then the cable passes signal and is okay to use. Conversely, standard speaker cables as described above lack the extra shielding to protect the instrument's sensitive signal. A few tears in cloth covering over wood, but the grill cloth is in excellent shape.
When buying an instrument cable for your guitar or other, you need to keep a few things in mind. A bit of soldering repair may be needed. Made sure that they were plugged in fully, still no results.
The amp is turned on. I have been using these for about 6 months with no issues but now all the sudden i can hear the clean guitar sound cutting through the distorted. The amp is not in standby mode.
Test each finished cable with a cable tester before adding it to your pedalboard. Electric guitar and a shocking amp makes wild music electrical question: So, i went and bought a guitar to usb converter cable (not of any particular brand)!!
Assuming you already own a guitar cable you will just need a 1/8 inch male to 1/4 female adapter which costs around $5 so you will be able to connect your guitar to the mic jack. If sound comes out of one amp, but not the other, then the problem most likely lies within the amplifier. The building does have sufficiently working electricity.
That can help determine if a signal is in fact traveling the full length of the cable.